外文文献.doc

如何延长轴承寿命 图尔加埃萨尔 美国密歇根大学研究生研究助理机械工程系安阿伯Ann Arbor tersal @umich.edu 杰弗里L斯坦 美国密歇根大学机械工程学系教授Ann Arbor stein @umich.edu 卢卡斯 塞浦路斯大学机械与制造工程讲师部lslouca@ucy.ac.c 参考文献 [1] Mehrabi, M. G. and Ulsoy, A. G., 1997, State-of-the-Art in Reconfigurable Machining Systems, ERC/RMS Technical Report, University of Michigan, Ann Arbor [2] Koren, Y. and Kota, S., 1999, Reconfigurable Machine Tool, U.S. Patent 5,943,750 [3 Landers, R. G., Min, B.–K., Koren, Y., 2001,“Reconfigurable Machine Tools”, Annals of the CIRP, Vol.50/1, pp. 269–274 [4] Moon, Y-M., 2000, Reconfigurable Machine Tool Design:Theory and Application, Ph.D. dissertation, Department of Mechanical Engineering, The University of Michigan, Ann Arbor, MI [5] Yigit, A. S. and Ulsoy, A. G., 2002, “Dynamic Stiffness Evaluation for Reconfigurable Machine Tools Including Weakly Nonlinear Joint Characteristics”, Proc. IME, Part B:Journal of Engineering Manufacture, Vol. 216/B1, pp. 87-101 [6] Moon, S-K., 2002, Error Predication and Compensation of Reconfigurable Machine Tool Using Screw Kinematics, Ph.D. dissertation, Department of Mechanical Engineering, The University of Michigan, Ann Arbor, MI [7] Karnopp, D. and Rosenberg, R. C., 1975, System Dynamics: A Unified Approach, John Wiley Sons [8] Koren, Y., 1984, Numerical control of machine tools, Khanna, Nai Sarak, Delhi [9] Gross, H., 1983, Electrical feed-drives for machine tools, John Wiley Sons. [10] Chen, Y. and Tlusty, J., 1995, “Effect of low-friction guideways and lead-screw flexibility on dynamics of high-speed machines”, Annals of the CIRP, Vol. 44/1, pp. 353-356 [11] Pritschow, G., Bretschneider, J., Fahrbach, C., 1996, “Control of High Dynamic Servo Axes for Milling Machines”, Production Engineering, Vol. 3/1, pp. 63-68. [12] Smith, D. A., 1999, Wide Bandwidth Control of High-Speed Milling Machine Feed Drives, Ph.D. dissertation,Department of Mechanical Engineering, The University of Florida, Gainesville, FL [13] Poignet, Ph., Gautier, M., Khalil, W., 1999, “Modeli