线圈骨架注塑模具设计.docVIP

线圈骨架注射模工艺设计及模具CAD 摘 要 ：通过对塑件的工艺分析，确定了注射模具的结构、冷却系统等。由于塑件的形状复杂，因此为了减少抽芯机构的数量，就把分型面设置在非同一平面上，只有侧凹采用了抽芯机构。该抽芯机构结构简单，操作方便灵活，而且容易加工。该注塑模具采用一模两腔，顺序脱模，组合型芯。分两个型芯，一大一小。而且使用了很多标准零件，从而减少了设计的工作量。结构合理，运动可靠，满足了自动化大批量生产的要求，提高了生产效率和保证了产品的质量 关键字：工艺分析 注塑模具 抽芯机构 脱模 Abstract：Through the technological analysis of the plastic part, the structure and the cooling system of the injection mould are determined. As a result of the complexity of the plastic part, therefore ,in order to reduce the number of the core-pulling mechanism, the parting line isn’t on the one plane and only two side-holes use core-pulling mechanism. The structure of the core-pulling mechanism is simple , is operated conveniently and flexibly and manufactured easily. The injection mould uses one mould with two cavities, subsequent demoulding, one-stage ejection and assembled cores.It have two cores,one is bid and one is little. And a lot of standard parts are used to reduce too much work. The mould structure is reasonable and the movement is reliable. It can meet the requirement of automatic mass production, ensure the quality of the product and improve the production efficiency . Key words:technological analysis injection mould core-pulling mechanism demoulding 目录 摘要…………………………………………………………………………………1 Abstract……………………………………………………………………………1 第一章绪论 1.1引言………………………………………………………………………………3 1.2塑料的分类……………………………………………………………………… 3 1.3塑料的性能和用途…………………………………………………………………3 1.4塑料的主要成型方法………………………………………………………………4 1.5塑料模具的发展趋势………………………………………………………………4 第二章线圈骨架模具设计及CAD 2.1塑件分析 ……………………………………………………………………… 6 2.2模具总体结构设计………………………………………………………………7 2.3估算塑件体积或重量初选注射机………………………………………………7 2.4型腔总体结构设计………………………………………………………………8 2.4.1确定型腔的数目………………………………………………………………8 2.4.2选定分型面………………………………………………………………… 9 2.4.3确定型腔配置…………………………………………………………………9 2.5分析计算…………………………………………………………………………9 2.5.1浇注系统设计…………………………………………………………………9 2.5.2成型零部件设计 ……………………………………………………………10 2.5.3导向及脱模机构设计…………………………………………………………11 2.5.4侧向分型与抽芯机构设计 ……………………………………………………12