整体式多路阀结构.pptVIP

Original Mission High Flow Auxiliary Reduce Seal Leaks Improved Metering Reduce Operator Fatigue Spool Force Featured Changes High Flow Auxiliary Valve Cavity Size Increased Port Size Increased to 1.3125” Featured Changes Reduce Seal Leaks One Piece Casting to eliminate Five O-rings Low Pressure on Spool Seal Spool Seal Orientation Not as Critical Forged Inlet Fitting Robust 4” tall Fitting Combined Low Pressure Drain for BICS, Auxiliary Control, Spool Seal Featured Changes Improved Metering Constant Low Pressure on Spool Seals for Reduced Pedal Force Spool Metering Notches optimized Flat Spool Forces Reduce Operator Fatigue and Improve Comfort Featured Changes Port Relief, AntiCav, Load Check Leakage Improves with Use. Robust to contamination More likely to flush out Load Check and AntiCav are Identical Design New Test Bench Automatic Testing Detent force testing Stroke vs. Force Profile Sticky spool Stroke vs. Flow Profile Wrong spool Missing notches Consistent Test Method for all Inspectors Electronic History Tracking by S/N New Test Bench New Test Bench Done * Increased Port Size Forged Inlet Fitting Combined low pressure drain Common Anti-cav and load check valve Lift spool load check/BICS check valve Combination Port Relief Anti-cav Valve Main Relief base LIFT rod AUX. base TILT rod Port Relief/Anti-Cav. Anti-Cav. base LIFT rod AUX. base TILT rod Port Relief/Anti-Cav. base LIFT rod AUX. base TILT rod Plug or optional Port Relief/Anti-Cav. Load Checks LIFT AUX. TILT BICS Pilot to Open Checks Port Relief/ Anti-Cav. Load Check Load Check/ BICS Pilot Check BICS Lock Valve Computerized Data Collection by Serial Number Automated spool actuation Automated port connections *