注塑模具冷却系统的关键技术及研究进展.pdfVIP

第42 卷，第9 期 工 程 塑 料 应 用 Vol.42 ，No.9 115 2014 年9 月 ENGINEERING PLASTICS APPLICATION Sep. 2014 doi:10.3969/j.issn.1001-3539.2014.09.028 注塑模具冷却系统的关键技术及研究进展 1 2 1 冯刚 ，田雅萍 ，张朝阁 (1. 浙江工业职业技术学院，浙江绍兴 312000 ； 2. 中国重汽集团济南橡塑件有限公司，济南 250306) 摘要：介绍了注塑模具冷却系统的设计，并着重探讨了注塑模具冷却的前沿技术包括脉冲技术、CO2 气体冷却技 术、随形冷却技术及发展现状。叙述了我国注塑模具冷却系统的研究现状。最后对注塑模具冷却系统的发展前景进 行了分析预测，结合现代先进制造方法，降低设计成本，加强理论成果的适用性等成为未来研究者的主要方向。 关键词：注塑模具；冷却系统；新技术；研究进展 中图分类号：TQ311 文献标识码：A 文章编号：1001-3539(2014)09-0115-05 The Key Technology and Research Progress of Injection Mold Cooling System 1 2 1 Feng Gang ，Tian Yaping ，Zhang Chaoge (1.Zhej iang Industry Polytechnic College ，Shaoxing 312000 ，China; 2.Sinotruk Group Jinan Rubber and Plastic Co. Ltd. ，Jinan 250306 ，China) Abstract ：The design of inj ection mold cooling system was introduced ，and the front technology including pulse current technology, CO2 gas cooling technology, conformal cooling technology and development situation of inj ection mold cooling system were emphatically discussed. The current research status of inj ection mold cooling system at home was described. Finally ， the development prospects of inj ection mold cooling system were analyzed and predicted ，combined with modern advanced manufacturing methods ，reducing the design cost ，enhancing the applicability of theoretical results became the main direction of future researchers. Keywords ：inj ection mold ；cooling system ；new technology ；research progress 随着近代工业的迅猛发展，人们的日常需求也日益多 和成