东方热水泵.pdfVIP

HPK Brief Introduction for HPK Pump E-mail:eastpump@163.net Brief introduction and product features GB9699.1 The product compiled according to GB9699.1 The general principal of using instruction for industral product HPK HPK type hot-water circulation pump is a serial product which is developed and designed by combining foreign advanced technology. Its structure form is horizontal frame mounted, radial split, back-pull-out and center line supported singlestage, singlesuction volute casing centrifugal pump. The pumps reliability at the conditions of high temperature and high pressure has been fully considered on design: On the cooling system, it not only has a cooling housing on the pump cover and the bearing housing, but also has a radiator struct- ure on its bearing housing surface, so the cooling effect is fine; The bearing selects the combination of column roller bearing and back-to-back angular contact ball bearing, and adopts oil lubrication with a thrower, and its load bearing capacity has been improved greatly; Pump shaft has been increased a size comparing with the normal frame mounted pump. Via proper heat treatment procedure, the resistance of torque and rotors hardness are better; Shaft seal adopts single-face, balanced type mechanical seal. It also may adopt soft packing seal.They can meet the requirements of all kinds of sealing conditions; Spouer coupling structure need not dismantle the pipeline when check and repair the pump, so it is convenient and applicatle. HPK HPK type hotwater circulation pump is center supported, the ratating parts may be dismantled without moving the casing.The motor may still be fixed on the base plate