基于多项式拟合的交互式程序.docVIP

基于多项式拟合的交互式程序 写在前面 这个m程序功能很简单，只是用polyval 和 polyfit再加上一些说明，适合 Matlab编程的初步学习阶段。对拟合做过一番研究的不必看了， 高手就更不 必看啦，。 基本功能 输入待拟合的数组1和数组2 绘制曲线 高级选项 1 设定拟合级数进行拟合 2 去除一些点后进行拟合 3 修改某些点的值后进行拟合 程序赋值粘贴 function lnear() fprintf(Thanks for using the function - Linear!\n); fprintf(How many numbers of the List?\n); % x = [1, 2, 3, 4, 5, 6, 7, 8, 9 ]; % data for Test % y = [6, 17, 34, 57, 96, 121, 162, 209, 262];% data for Test N = input(); x = getdata( 1,N ); y = getdata( 2,N ); figure( LuckNUmber()) stem(x,y,g*); hold on [mse,series] = ReturnMse(x,y); DrawtheFigure(x,y,series,g); fprintf(I want to check the mse\nMSE = ); fprintf(%4.3f, ,mse); fprintf(\n); option = -1; while option ~= 0 fprintf(Here is something advanced: \n) fprintf(1: specify series to draw figure\n) fprintf(2: remove some datas and go on\n) fprintf(3: modify some datas and go on\n) fprintf(0: quit\n) option = input(); if option ==1 series1 = input(The specified series is\n); DrawtheFigure(x,y,series1,r); elseif option == 2 [ List1,List2 ] = Remove(x,y) [mse,series] = ReturnMse(List1,List2); DrawtheFigure(x,y,series,y); elseif option == 3 [ List1,List2 ] = modify(x,y) stem(List1,List2,c*); [mse,series] = ReturnMse(List1,List2); DrawtheFigure(x,y,series,c); end end fprintf(Have nice Time!\n) end % 多项式拟合数据的获得,输入数组序号和数组长度, 输入数组 1 和数组 2 function x = getdata( i,N ) x = zeros(1,N); Ordinal = [1,2,3]; fprintf(\nI need List %d:x = $\n,i); for n = 1 : N fprintf(number %d:\n,n); x(n) = input(); end fprintf(I have get List %d:\nx = %d\n,i); fprintf(%d ,x); flag1 = input(\nIs it correct? 1/0\n); while flag1 == 0 fprintf(Be careful! Now tell me ); M = input(How many numbers are wrong?/$\n); if M 3 error(U have input too many wrong number!); else for m = 1:M Ordin = Ordina