多方位VSP技术在伊45区块伊45-1-3井区储层开发中的应用.pdfVIP

Applications of Multi-azimuth VSP Technology in Reservoir Production for Well YI 45-1-3 at Target Area YI-45 Zhang Hongxian*. Borehole Seismic Service Centre, BGP, CNPC, Tianjing, 300280 Liu Xuwu. Production Department, Jilin Oilfield Company, Jilin 138000 Huang Xinwu. China Univ. of Geosciences, Beijing 100083 Summary In recent years, the drilling targets have aimed to areas with more complex structures and lower signal-to-noise ratio of seismic data, which will Yi45-1-3 increase the probability of drilling failure to some extent. It is necessary to integrate various methods and techniques from various disciplines for evaluation of sidetracking targets. As a case Yi12-18 history, multi-azimuth VSP technology has been successfully used for reservoir production in target area Yi-45, favoring to velocity model building, horizon calibration, fine structure interpretation and target reservoir inversion and prediction. this example shows the importance and prospect of this Fig.1 Location of Well Yi45-1-3 technology in reservoir production with complex structures. Formation near to Well Yi45-1-3, where the acquisition azimuth and offset are 337° and 61m 1 Introduction respectively for the zero-offset VSP, 157° and 2000m respectively for the first offset VSP and Target Area Yi-45 locates in the unproved area 337° and 1700m respectively for the o second