改善750kV变电站进出线电磁环境研究.pdfVIP

改善750kV变电站进出线电磁环境研究 1 1 1 2 薛更新 谭浩文  席晓丽   赵录兴   （1.西北电力设计院，陕西省 西安市 710075 2.中国电力科学研究院 北京市 100192） APPROACH ON IMPROVE ELECTROMAGNETIC ENVIRONMENT OF 750kV ELECTRIC SUBSTATION IN AND OUT LINE Xue geng-xin Tan hao-wen Xi xiao-li Zhao lu-xing (1.Northwest Electric Power Design Institute, China Xi’an Shaanxi 710075 2.China Electric Power Research Institute,Beijing, 100192) 摘要：750kV 输电线路的导线选型一般由电磁环境控制，但由于变电站进出线走廊的限制、终端塔的导线布置及变 电站的电磁影响，使得进出线段的电磁环境十分复杂。本文提出子导线间加子线的方案解决变电站进出线及耐张塔 电磁环境问题。研究中采用逐次镜像法计算导线表面电场强度，采用有限元法计算塔身对导线表面电场强度的影响， 采用激发函数、BPA 公式分析研究了不同子导线间距情况下的无线电干扰、可听噪声。研究结果表明：子导线间加 子线可有效地改善电磁环境影响。 Abstract: Usually the conductor selection of 750kV transmission line is controlled by the electromagnetic environment, but because of the restrictions of the substation outlet corridor, the affection of the terminal tower conductor’s layout and the substation’s electromagnetic field, the electromagnetic environment of the outlet becomes very complicated. In this paper, sub-wire built-in sub-conductor is put up to solve the electromagnetic environmental problem of outlet of substation and tension tower. In the research, successive mirror method is used to calculate the electric field on the conductor surface; finite element method to calculate the tower’s affection to electric field of the conductor’s surface; excitation function method and BPA formula to analyze radio interference and audible noise in different conductor distances. The result indicates that sub-wire built-in sub-conductor can deduce the electromagnetic affection effectively. 关键词： 750kV 、变电站进出线、无线电干扰、可听噪声、子导线间加子线 Key words: 750kV; outlet and inlet