间歇性链传动系统的动力学研究.pdfVIP

Dynamics Study on Intermittent Transmission Chain System Yuhu Yangⅰ Xingang Houⅱ Jianping Liuⅲ Ce Zhangⅳ College of Mechanical Engineering, Tianjin University, Tianjin 300072, China Abstract —The paper analyzed the dynamic factors that from position A to expectant position B then stopped; after realize intermittent motion of chain system, discussed the system’s this procedure, the chain repeated above-mentioned dynamics modeling method, set up the dynamics equation and intermittent- intermittent motion, thus turn to continuous then adopted mode superposition method to solve the equation. intermittent motion. Based on it, in order to prove the theory analysis, the paper took the intermittent transmission chain system of die-cutting machine as example, built the dynamic experiment set, tested and analyzed the dynamic characteristics of chain intermittent motion; through the comparison between experimental data and theory, it proved the correctness of the modeling method. The modeling and experiment method will be guidance to deeper research. Keywords: Chain, Intermittent motion, Dynamic Modeling, Experiment I. Introduction Vibration and noises generated by chain transmission during the high speed application is the main problem of dynamic research. Researchers have carried out various experiments and investigation for studying this question. The reference [1-3] discussed the sprocket wheel and link 1. Drive sprocket 2. Gripper 3. Chain equivalent modeling; analyzed impact and noise problems