带式水浸用户手册.pdfVIP

Installation Application IRM-S01W IRM-S01W Fix the Water Immersion Detecting Cable in the detected area by using the accessories. Connect the cable to the input terminals of IRM-S01W Water Immersion Sensor (See the diagram below). When the cable immerses into the water, the conductive rate is over the alarm threshold value and the red alarming light of IRM-S01W is powered on so that the output contact is closed. Otherwise, the red light is off and the output contact is open. IRM-S01W 1m Main Technical Index Length 5 10m Weight 500 1000g Detection density full scale linearity Width 12mm Thickness5.5mm Notice Accessories packed shall be used to fix the cable in the installation The Water Immersion Detecting Cable shall not be fixed by other nails which might affect the function Inspection and packaging requirements 1 (Inspection) 1.1 (SEMBLABLE REQUIREMENT) The surface is no disrepair,rupture trace 1.2 IRM-S01W Connect the cable to the input terminals of IRM-S01W to test the output situation 2 (Packaging) 2.1 ROHS packing each unit length of products using plastic bags ,affixe the Chinese ROHS mark on the plastic bags, and send out together with the Statement cards of the electrical and electronic products made with toxic and harmful substances or elements 2.2 Marked on the box Product model, quantity; 2.3 When clients receive the products, the packing seals should be intact; box should be no breaks, cracks, damp and other problem.