毕业设计（论文）-基于AT89S52单片机的调频发射机的设计.doc

原创性声明 本人呈交的学位论文，是在导师的指导下，独立进行研究工作所取得的成果，所有数据、图片资料真实可靠。尽我所知，除文中已经注明引用的内容外，本学位论文的研究成果不包含他人享有著作权的内容。对本论文所涉及的研究工作做出贡献的其他个人和集体，均已在文中以明确的方式标明。本学位论文的知识产权归属于培养单位。 本人签名： 日期： 摘 要 调频发射机是目前应用最为广泛的音频发射设备，而且技术上比较成熟，音质较好，并且可以实现立体声广播，但大多数调频发射机仍然存在发射频率固定单一的问题。为了满足不同用户对发射频率的要求，本文设计了一个数字立体声调频发射机，通过单片机控制频率锁相环，从而实现发射频率在一定内灵活可调。该数字化立体声调频发射机锁相频率控制具有较高频率稳定度发射频率MHz范围内任意可调单片机ABSTRACT FM transmitter is the most widely used audio emission equipment and technology, and the sound quality is comparatively mature, and can realize stereo broadcasting, but most FM transmitter remains fixed single transmit frequency. In order to meet different requirements of users for the transmit frequency, this paper designs an FM transmitter, through digital stereo AT89S52 SCM control frequency and phase lock loop, so as to realize the transmit frequency within the scope of certain and flexible adjustable. This design is by AT89S52 SCM control module, BH1415F FM modulation launch module, LED digital pipe display modules, power module, audio input module, a piece of special antenna. Control module is through the small keyboards to send information, AT89S52 SCM languae sent to deal with the code BH1415F chip, FM modulation launch module is directly with transfiguration diode, combined with FM phase lock loop (PLL) system, can get very high center frequency stability. This digital stereo FM transmitter, realized the lock cirtle frequency control, with high frequency stability, in 87.5 MHz to transmit frequency 108.0 MHz range arbitrary adjustable. The high frequency signal through the antenna to the air launch FM radio waves, for headset, with FM receiver function such as the equipment to receive. This design schools indoor wireless radio for teaching and TV spot, etc. This paper mainly divided into five parts, from nc FM transmitter, plan analysis and summary of the argument, system hardware design and implementation, and system of software design and programming, system ass