毕业设计（论文）-基于μCOS的物联网终端的设计.docVIP

本科学生毕业设计 基于μC/OS的物联网终端的设计 院系名称： 专业班级： 学生姓名： 指导教师： 职 称： 讲 师 黑 龙 江 工 程 学 院 二一二年六月The Graduation Design for Bachelors Degree Based on μC/OS Networking Terminal Design Candidate：： and Instrumentation Class： Supervisor：Lecturer Zhang Lingzhi Heilongjiang Institute of Technology 2012-06·Harbin 摘 要 物联网是指在全球统一的编码系统基础之上,利用互联网技术和射频识别(RFD)技术、无线数据通信技术、计算机技术等基础上形成的广义的技术体系，以此构造的覆盖世界上万事万物的实物互联网。物联网概念一经提出就受到世界各国以及整个IT行业的一致认可和好评，所以，物联网核心的终端更是有广阔的前景，尤其是基于ARM处理器并采用μC/OS-Ⅱ操作系统的终端系统。 立足于物联网需求特别考虑到实时性能和成本因素本课题设计了一套工业应用的针对信息采集的物联网终端系统。本课题主要由一种由传感器和嵌入式系统组成主机，将采集数据发送到Internet上的物联网技术应用。系统采用ARM微处理器作为核心处理单元，将接收到的温湿度传感器发送的即时温湿度数据信息，通过DA9000模块发送到以太网公共网络。采用socket编程技术建立服务器，接收嵌入式主机发送的数据信息，将数据上传到Internet，在通过Internet向物联网终端发出操作命令μC/OS-Ⅱ Abstract The internet of things is the world unified coding system which based on the use of the Internet technology，and the radio frequency identification(RFD)technology is wireless data communication technology。Computer technology and so on are formed on the basis of general technology system which constructed by covering the world of all things real internet。Networking concept was put forward by the countries in the world and the whole IT industry the unanimous recognition and praise so，networking core terminal there is more broad prospects，especially based on the ARM processor and the use of μC/OS-Ⅱoperating system of the terminal system。 Based on the demand of Internet of things，especially considering the real-time performance and cost factors，this thesis designs is a set of industrial applications for information acquisition network terminal system。This topic is mainly composed of a sensor and embedded system composed by the host，that will collect the data and sent these data to the internet on the Internet of things technology。System using ARM microprocessor as the core processing unit，receives a temperature and humidity sensor transmits real-time temperature and humidity data information，throug