毕业设计（论文）-家用电器的电话智能遥控装置的设计.doc

毕 业 论 文（设计） 题 目：家用电器的电话智能遥控装置的设计 学 院： 机电工程学院 学生姓名： 专 业： 电子信息工程 班 级： xxxxxxxx 指导教师： xxxx 起止日期： 2011.12.16——2012.05.18 2012年 5 月18 日 家用电器的电话智能遥控装置的设计 Abstract With the rapid development of high-tech and peoples material living standards rising, people in the family room of the home appliance configuration is also becoming more upscale and complete, but the ordinary appliance management model is difficult to adapt to the development of high-tech count. So people began to turn its attention to these intelligent appliances to control the problem. But at this stage of this technology and can not be fully reflected in the daily life of ordinary people. So based on this phenomenon, the subject content is designed based on AT89C52 simple remote telephone control system. This design subject is a Remote Phone Control System based on AT89C52. AT89C52, the use of existing personal communication terminal, based on the PLMN (land-based mobile communication network) and PSTN (public switched telephone network) phone remote control system. Introduction the planning of the need to implement the basic functions of the system .The first chapter briefly describes the design of the research background and significance, and describes the situation of the country at this stage the development of the intelligent home. Found that in comparison with foreign domestic inadequate in this respect. That is starting to slow, the direction of scattered, resulting in a quantity not fine situation. The second chapter begins to come to the question, determine the work flow of the system, and introduced the ISD2590 on AT89C52 and MT8870 few major chip. Chapter III described in detail the hardware circuit, including the circuit diagram of each functional unit, as well as the choice of the parameters of each component. The fourth chapter describes the software modules of the