The user manual of the desktop-CNC.doc

The user manual of the desktop-CNC 6040 triaxial engraving machine part parameters: X,Y,Z Working Area: 580×400×75mm Max. Feeding height: ≤100mm Outside dimension: 880?670?530mm Table size: 745?480mm Lathe structure: 6061/6063 Aluminium alloy Stepping motor: two-phase 57/3A Drive unit: 1605 ball Screw Sliding unit: Chromeplate shaft Maximum speed: 0-4000mm/min Engraving speed: 300-3500mm/min Repeat positioning Accuracy: 0.05mm Spindle motor: 800W VFD spindle motor Spindle speed: 24000RPM/MIN Cutting tool-holder: ER11/3.175mm Interface: Parallel port Software Compatability: Mach3/Emc2,(Type3,Wentai, ArtCAM) Command code: G code/.nc/.ncc/.tab/.txt Machine weight: 54kg（including packaging） 　 Control box parameters: Operating Voltage : AC220V Work theory : 3977 3-axis control box with the power supply + spindle speed regulator Control unit : 3A stepping motor driver plus adjustable spindle speed controller Computer connection : on board palrallel port Command code : G code Acceptable software : Mach3 EMC2 Protection : Emergency stop button Application: CNC 6040 is designed for large area engraving work .The Computerized CNC Engraving and Cutting Machine is suitable for various materials, such as WOOD, PMMA or other plastic,MDF board,native wood,PVC,Acrylic, wood,composite board plywood, It can be used widely to process or make adverstising signs,PCB,nameplates,badges,seals,bronzing plate,aluminium alloy,acryplates,ABS resin double color plate,PVC foaming board,indentation plates,signs,construction models,instrument panels,wooden products,etc. Packaging : 1? Engraving machine 1? Control box 1? Parallel cable 1? Power cable 1? Tool box and tools 3? Axis motors 1? 1.5KW inverter 2? Connect wires Notice: 1. This machine should be used with the PC parallel port and controlled by Mach 3 or other software. The PC parallel port should work in condition of the EPP mode, the setup of the EPP mode should be applied on the main board BIOS. 2. You’d bet