毕业设计（论文）-嵌入式系统中文字处理软件的设计.doc

目 录 嵌入式系统中文字处理软件的设计 摘 要 在本次毕业设计《嵌入式系统中文字处理软件的设计》中，根据当前的实际条件和所学的知识，先介绍了嵌入式系统的系统结构、系统特点、硬件与软件，再就文字处理的技术及原理进行介绍，紧接着在第四章中就嵌入式处理器及编译环境分析了80C51、ARM、凌阳单片机，在总结出它们的特点及功能后我选择了处理器PHILIPS ARM LPC2104，并对它进行了详细介绍。系统中用到的显示器是以T6963C LCDC控制器为核心的128*128点阵的LCD带背光的黑白LCD。键盘为自制的4*4矩阵按键。整个系统主要包括三个主要部分：ARM处理器的启动、LCD的API调用、键盘（4*4）的工作方式和驱动程序的编写与控制。由于ARM处理器是一个32位的高性能多功能嵌入式处理器，有较为复杂的功能，要使ARM处理器正常工作起来需要许多的初始化过程，基于此原因我重点对ARM的引导和启动方面做了一些工作，从而使ARM处理器能正常的启动为此设计做好基础。 关键词 嵌入式系统、 ARM、 系统启动、 LCD、 文字处理 Abstract In this graduation project design of embedded systematic word processor , according to the present actual condition and knowledge studied , have introduced systematic structure , system characteristic , hardware and software of the embedded system first , make an introduction on technology and principle of word processing and then, compile environmental analysis 80C51 , ARM , insult positive one-chip computer on embedded processor among chapter four and then, I have chosen the processor PHILIPS ARM LPC2104 after summarizing their characteristic and function, and has made a detailed instruction to it. The display used in the system is that LCD of 128*128 lattice taking T6963C LCDC controller as the core takes black-and-white LCD in a poor light. The keyboard is 4*4 matrix buttons made by oneself. The whole system mainly includes three main parts: API of start , LCD of ARM processor transfers, the working way and driver of the keyboard (4*4 ) one is written and controlled. Because ARM processor is a multi-functional embedded processor of high performance of 32 for one, there are comparatively complicated functions, it takes a lot of course of initializing to make ARM processor work normally, I have made some work to the guide of ARM and respect of starting especially on the basis of this reason, thus enable ARM processor to design foundation of doing well for this in normal start . Keyword: Embedded system, ARM, Boot Loader, LCD, Word Process 一 引 言 1.嵌入式系统简介 随着微处理器技术的发展,嵌入式系