毕业设计（论文）-手柄冲裁模设计与制造.docVIP

目录 摘 要 2 引 言 3 1 冲压件工艺性分析及冲裁方案的确定 4 2主要设计计算 5 2.1 排样方案的确定及计算 5 2.3 压力中心的确定及相关计算 8 2.4 工作零件刃口尺寸计算 9 2.5 卸料橡胶的设计 12 3模具总体设计 14 3.1 模具类型的选择 14 3.2 定位方式的选择 14 3.3 卸料﹑出件、导向方式的选择 14 4 零件的结构设计 16 4.1 落料凸模的设计 16 4.2 冲孔凸模的设计 17 4.3 凹模的设计 18 5模具材料的选用及其它零部件的设计 20 5.1 模具材料的选用 20 5.2 定位零件的设计 21 5.3 料板及卸料部件的设计 22 5.4 模架及其他零部件的设计 22 6 模具总装图及设备的选定 24 6.1模具的总装图 24 6.2 设备的选定 25 7 模具零件加工工艺 26 8 模具的装配和冲裁模具的试冲 28 8.1 模具的装配 28 8.2 冲裁模具的试冲 29 总结 32 致谢 33 参考文献 34 摘 要 我国冲压模具无论在数量上，还是在质量、技术和能力等方面都已有了很大发展，但与国民经济需求和世界先进水平相比，差距仍很大，一些大型、精密、复杂、长寿命的高档模具每年仍大量进口，特别是中高档轿车的覆盖件模具，目前仍主要依靠进口。Abstract Our stamping die in terms of quantity, or in quality, technology and ability are there has been a great development, but with the demands of national economy and the world advanced level photograph is compared, difference still very big, some large, precision, complex, long-life high-grade die each year is still a large number of imports, especially in the high-end car cover mold, it is still mainly rely on imports. Thus only cultivate talents mold ability is contractible our country and the developed countries and the distance between. This graduation project I is designed to handle the blanking die, is the use of progressive die production. Progressive die, also known as the multi-position progressive die, die, jump model, it is in a mould, according to the processing work is divided into a number of equal distance station, at each station set or a few basic stamping process, to complete the stamping part processing. The material to be processed prior to processing, with a certain width strip, a feeding method, each in one step. The station after being punched one by one, then get a complete stamping workpiece. In a progressive die, can continuously finish blanking, bending, deep drawing, forming processes. In general, no matter how complex shape stamping parts, stamping process how, by a pair of progressive die. The design emphasis is on the analysis of blanking deformation process and the quality o