毕业设计（论文）-圆盘剪切机设计说明书.docVIP

摘要 圆盘剪用于剪切带材的边部和把宽带材切分成窄带材 ,被广泛用在板带生产车间和辅助作业机组中 ,如横剪机组、纵剪机组、重卷机组、酸洗机组、镀锡机组及焊接机组等。圆盘剪工作好坏直接影响到产品的质量。Summary Disc cut for shear edge strip and wide strip cut into narrow strip, widely used in strip production plant and auxiliary operating units, such as cross cut unit, slitting machine, recoiling unit, pickling units, tinning unit, and the welding unit. Disc cut a direct impact on the quality of the product. The design starting from the actual working environment, to determine a clear direction of graduate design. Recurring problems and disc shearing machine in use has done some research, and application of innovative design calculations. Design calculations has already begun on the subject, and made a breakthrough in nearly exhibition design process has to start quickly to determine the content and methods of work. At the same time, has completed the inspection of the relevant information, has been the overall analysis of the subject. Design ideas have been very clear, and there had been some progress. Disc-type shearing machine blade is a rotating disk, which can be continuous vertical shear movement sheet and strip. Disc shears are usually set for the movement of the plate longitudinal edges cut flush cut or cut into narrow steel finishing operations online can be divided according to their uses scissors and cut the disc side of the clipboard cut the disc of the strip are cut. The selected disc shears as a design topic is in the context of research on the 1700 cross-section units. 1700 cross-section of the unit used for many years, of which there are some problems in the use of disc cut. Plant the shears also conducted a number of transformation. Disc cut end of the transmission system accuracy radial adjustment of the body and the blade lateral adjustment accuracy urgently requires updating and transformation design. The purpose of this design through the design of the spindle drive, blade lateral adjustment of the body, especially the part of various agencies of