毕业设计（论文）-基于AD73360的同步录音系统.docVIP

毕业设计说明书（论文）中文摘要 多通道数据采集系统一般是在一块印刷电路板上集成了模拟多路开关、程控放大器、采样/保持器、A/D和D/A转换器等器件。这类系统虽然可以采集多路模拟信号，但其实只有一路A/D转换器。为了能够采集多路模拟信号，只能利用模拟多路开关在多路模拟信号之间进行切换。这样做的好处是可以减少硬件成本和缩小板卡的尺寸，但是当多个模拟信号巡回采样时，各路信号之间必然存在采样的时差。所以为了减少采样时间差，就必需研究同步录音系统，用来给声源定位系统提供精确的采样数据。 本文首先简单介绍声源定位技术的研究现状及现有的声源定位的关键技术。然后再介绍本次毕业设计中涉及到的主要芯片与开发环境。最后对同步录音系统进行分析，提出基于AD73360 方案并分别画出原理图，对电路板的电源模块、按键控制模块、串口通信模块、A/D模块等作了详细的介绍。并且对两个方案得主要模块进行进一步的分析比较。 关键词： 声源定位；AD73360； 同步 毕业设计说明书（论文）外文摘要 Abstract Multi-channel data acquisition system usually integrated analog multiplexer switch,programmable amplifier,sampling holder ,A/D transducer and some other device on an printed circuit board. This type of system although acquisition multichannel analog signal, but in fact, only have one way A/D converter. In order to be able to capture multiple analog signal, you can only use analog multiplexer switch in multiplexed analog signal to switch between.The benefit is to reduce hardware costs and reduce the size of the board, but when the number of analog signal sampling circuit, various signals exist between the sampling time difference. So in order to reduce the sampling time difference, it is necessary to study audio system, to provide accurate sampling data for Sound localization system. This article first introduce the current research of sound localization technology and current key technologies of sound localization.And then introduce the main chip and development environment which is involved with this graduation project. In the end we analyse the Synchronous recording,put forward the two dirffent Programs which are base on ad73360 . It also introduce the Power Module,Key Control Module, Serial Port Communication Module,A/D Module and how to design them.we need Compare with two programe to make sure which is better than another one. Key words : Sound localization; AD73360; Synchronization;  目 次 1 绪论 1 1.1课题背景与意义 1 1.2声源定位关键技术 1 1.3面临的难题与挑战 3 2 主要芯片与开发环境 4 2.1 主要芯片AD73360介绍 4 2.2 开发环境介绍 9 2.3 本章小结 14 3 系统方案确定及原