干砌甩浆砌石墙通缝抗剪强度试验研究.pdfVIP

( 2) Journal of Bu ild ing Structures( Supp lementary Issue 2) 1 1 1 2 柴振岭 , 郭子雄 , 胡奕东 , 李 钢 ( 1. 华侨大学 土木工程学院, 福建泉州362021; 2. 大连理工大学 建设工程学部, 辽宁大连 116024) : , , 28, , ; , , , , , : ; ; ; : TU363 TU317. 1 : A Expermi ental study on shear strength ofmortar joint of drylaid stonem asonrywalls 1 1 1 2 CHA I Zhenling, GUO Zixiong , HU Y idong , L IGang ( 1. College of Civil Engineering, Huaqiao Un iversity, Quanzhou 362021, China; 2. Faculty of Infrastructure Engineering, Dalian Un iversity of Technology, Dalian 116024, Ch ina) A bstract: The shear strength ofmortar joint is one of themost mi portant parameters to estmi ate the seism ic behav ior of stonem asonry buildings. Tw entyeight stonew all specmi ens fabricated w ith drylaid m ethod were tested under double shear loading to investigate the shear strength and calculatedm ethod of stonem asonryw alls. Themain param eters are m ortar strength and normal compressive stress. Based on the test results, the shear behav ior, failure m ode, shear strength and deformation behav ior of mortar joint w ere analysed. It is indicated that the resistant process of the specmi ens consists of two stages, i. e. elastic energy dissipation stage and frictional energy dissipation stage. The crack of them ortar joint is postponed and the shear strength of themortar joint increases rem arkably because of the normal compressive stress. The effect of mortar strength, compressive stress and fabrication quality to the shear strength of m ortar joint is analyzed based on the test resu lts and the influence degree is also estmi ated using orthogonal