- 12
- 0
- 约1.28万字
- 约 4页
- 2017-08-11 发布于重庆
- 举报
水力压裂动态造缝的有限元模拟.pdf
维普资讯
第 28卷 第 6期 石 油 学 报 Vo1.28 No.6
2007年 11月 ACTA PETROLEISINICA NOV. 2007
文章编号 :0253—2697(2007)06—0103—04
水力压裂动态造缝的有限元模拟
赵益忠 程远方 曲连忠 王京 印 沈海超
(中国石油大 学石油 工程学 院 山东东营 257061)
摘要 :基于多孔介质流 固耦合理论 ,建立 了水力压裂动态造缝有 限元模型 ,对不 同裂缝形态 的动态造缝进行 了有 限元模拟。研 究
结果表 明:动态造缝会在井眼周 围形成类似于椭 圆形分布的致密带。对于楔形缝及椭 圆缝来说 ,随着靠近裂缝尖端造缝宽度 的增
加 ,造缝影响区域有所扩大 ,但 总体分布仍类似于椭 圆形。在井 眼周 围5m 以内区域 ,渗透率受动态造缝影 响明显 ,且距井 眼越近,
渗透率变化越剧烈;在近井致密带内渗流速度 明显降低,且造缝长度越小动态造缝对压裂井产能的影响相对越 明显。动态造缝形
成 的致密带是降低压裂井产能的一个重要 因素 。
关键词 :流 固耦合 ;水力压裂;裂缝形态;动态造缝 ;渗透率;渗流速度 ;有限元模拟 ;数学模 型
中图分类号 :TE357.11 文献标识码 :A
Finiteelementsimulationofdynamicfractureinhydraulicfracturing
ZhaoYizhong ChengYuanfang QuLianzhong WangJingyin ShenHaichao
(CollegeofPetroleumEngineering,ChinaUniversityofPetroleum,Dongying257061,China)
Abstract:A finiteelementsimulationmodelfordynam icfracturecreationwasestablishedonthebasisofthefluid—solidcouplingtheo—
ryforporousmedia.Thecreationofdynamicfractureswithdifferentgeometrywassimulatedwithfiniteelementmethod.There—
search resultsdemonstratedthatatightzoneasellipticdistributionwasdevelopedaroundthewellboreduringthecreationofdynamic
fracture.Forthewedgefractureandellipticfracture,thedimensionofinfluenceregionbyfracturecreation increasedwiththefrac—
turewidthincreasingnearthefracturetip,andthedistributionoftheinfluencezonewassim ilartOellipse.Thepermeability inthe
regionlessthan5m awayfrom thewellboreaxiswasinfluenceddramatically.Themoreadjacenttothewellboreaxis,themoresensi—
tivethepermeabilityalterationwouldbeobserved.Atthesametime,theDarcyvelocitydecreasesnoticeably inthetightzonenear
wellbore.Thefracturewith shorterlengthwouldresultinthemoresensitivefortheproductivityalterat
原创力文档

文档评论(0)