基于信息熵的轧辊裂纹声发射三维定位方法_路俏俏.pdfVIP

49 18 Vol.49 No.18 2013 9 JOURNAL OF MECHANICAL ENGINEERING Sep. 2 0 1 3 DOI 10.3901/JME.2013.18.078 * 1, 2 1 1 1 (1. 100083 2. 114021) (Acoustic emission, AE) TG333 TH17 3D Location of Acoustic Emission to Roll Cracks Based on Information Entropy LU Qiaoqiao1, 2 LI Min1 WANG Xiaojing1 XU Jinwu1 (1. School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083; 2. Angang Steel Co., Ltd., Anshan 114021) Abstract In the rolling process of the temper mill, the roll surface is always subjected to the huge contact stress, alternating stress and friction. It results in some cracks easily. Under the impact of the complex force, the cracks turn into the core of fatigue. In this way, the stress of the cracks tip increases sharply and leads to crack-propagation. It even results in the roll breakage and brings about production accident in severe cases. Meanwhile, the cracks grow with the rapid releasing of strain wave, which causes the phenomena of acoustic emission(AE). So the acoustic emission technology is adopted to locate the cracks in the roll of temper mill. The advantage of the technology is that cracks are located without point by point scanning and this technology is a high efficiency test and has