CFG35 Products Technical Parameters.docVIP

CFG35 Products Technical Parameters Drilling diameter (mm) 800 1000 Drilling depth (m) 35 30 Drilling speed(rpm) 9～17 Maximum output torque (kN·Mm) 130 Maximum up pulling force (kN) 800 Maximum speed pull up (m/min0 3.5 Main winch pull (kN) 100 Main hoist Pulley ratio 8 Pressure of pressurized winch (kN) 10 The Power full (kW) 210 Auxiliary winch pull (kN) 20 Column cross-section (mm×mm) φ820×10 The distance between rail (m) 6.2 The distance between steelwheels(m) 4.6 Pile frame full length (m) 12.5 The range of tilt column Forward 2 °, 3°backward The maximum allowable slope of the ground 2° Swing speed (r/min) 0～0.5 Power head hydraulic Skew axis Containing cylinder-type Running gear Ship track Step (mm) 2000 Track length (m) 7 Mail hoist Planetary reducer + hydraulic motors Pressure Winch Planetary reducer + hydraulic motors Outrigger cylinder 6 Working state length × width × height (m) 14.3X9.3X41 Transport state length × width × height (m) 11.5X2.84X3.11 Weight of work status (t) 90 Transport mode Spare parts 以上是正弘桩工机械有限公司生产的CFG35M系列长螺旋钻机（）的各项技术参数。 咨询请致电：0371联系人：张经理