基于报修信息配网实时故障定位方法研究应用.pdfVIP

2012 力系统自动化专委会学术交流研讨会论文集 于报修信息的配网实时故障定位方法研究及应用 1 2 3 韩韬 陈楷 刘健 （1.国 南瑞科技股份有限公司，江苏 南京 210061;2.南京供 公司,江苏省南京市2 10019; 3. 陕西 力科学研究院,陕西省西安市710054） 摘要：随着当前智能电网建设步伐的日益推进，配电自动化系统的覆盖率越来越广，供 电企业对配电系统的要求和应用水平不断提高。然而，由于配电网的复杂性和多变性， 导致在配电网运行发生故障时，很难准确、及时地定位到具体的故障源，特别是在没有 自动化系统覆盖的范围内，对故障源的定位更缺乏实用化的辅助方法。本 提出了一种 基于报修信息的实用化配网实时故障定位方法，以电网拓扑结构为基础，以报修信息为 辅助，实时定位可能的故障源，为供电企业的自动化故障定位提供基础支持。本方法依 赖的基础信息相对较少，在当前信息系统、自动化系统的建设水平下，具有使用简洁、 实用性的特点，实例表明了该方法的有效性和可行性。 关键词：实用化；配网系统；报修信息；故障定位；拓扑分析； Research on Real-time Call Information Based Distribution Networks Fault Locating Methods and its application 1 2 3 Han tao Chen Kai Liu Jian (1.Distribution / Rural Power Branch Department, NARI Technology DevelopmentCo., Ltd, Nanjing 210000;2 Nanj ing power supply company, Nanjing 210000;3 Shanxi Electric Power Research Institute，Shanxi ,710054 ) Abstract With the rapid development of the smart grid construction, the area covered by Distribution Automation System is increasing continuously, and people demand more improvement of the requirements of the Power Distribution System and application.However,due to the complexity and variability of the Distribution Network, with the power grid fault, it is difficult to accurately and timely to locate the specific location of fault, especially within the area lacks of automation system. This paper presents a practical method of Real-time call information based Distribution NetWorks fault locating, which based Distribution Network topology,as well as call information.It can locate the fault