毕业设计（论文）-无级变速器后壳体的数控工艺与加工.docVIP

毕业设计说明书 课题名称 无级变速器后壳体的数控工艺与加工 系 别 现代制造工程系 专 业 数控技术 班 级 数控0511 姓 名 曹 毅 学 号 0505021116 指导教师 郁元正 沈雪明 起讫时间： 2007年 12月31日～2008年3 月21 日（共8 周） 摘 要 无级变速器壳体是汽车无级变速器（CVT）总成的重要部件之一，分为左、中、右壳体,主要加工面由结合平面和及精密孔系组成。本课题通过来自书籍、网络的信息，分析了无级变速器的工作原理及变速器壳体的工艺特点与要求，继而通过绘制产品零件图进一步熟悉零件，并利用Pro/E绘制了3D实体模型；充分利用数控加工的技术特点，对该产品的工艺规程进行了重新设计，在保证质量的同时，以最高的效率，最低的成本来完成工件的加工。主要设计内容包括：完成变速器壳体的工艺规程（包括工艺过程卡、工序卡）设计及主要工序的工装设计，绘制夹具图的装配图和主要非标准零件图、用G代码编制变速器壳体的数控加工程序。本课题的重点是机械加工工艺规程设计、夹具装配图的准确绘制、数控加工程序的编制。难点是所设计的工艺路线能做到兼顾精度、效率及经济性，所设计的夹具保证要求The automotive CVT assembly consists of left, middle and right housings. As one of the most important parts in automatic transmission assembly, CVT housings are expected to be reliable and accurate. Engineering drawing for the product is helpful for understanding the structure of the part. With the establishment of 3D model of the part by Pro/E software, the project analyzed the characteristics and machining requirements of the part, and redesigned machining process for it to ensure the accuracy of the part and cost-efficiency of the machining procedure.. The relevant fixture for machining the precise hole system at the ends of the housing has been designed as well. The main design content includes: Complete the machining procedure design (including machining procedure process card, machining step card) and the fixture design for a main machining step, draw up the assembly drawing of the fixture and drawing of non-standard parts, Programming for the machining with the G codes. This topics key point is the machine-finishing technological process design, the jig assembly drawing accurate plan, the numerical control processing program establishment. The design of accurate, efficient and economic machining procedure and simple but precise fixture is the difficulty of the project. The project propos