加热炉装料机设计.doc

编号： 桂林电子科技大学信息科技学院 毕业设计(论文) 题 目： 加热炉装料机设计 院 （系）：专 业： 学生姓名： 学 号： 指导教师单位： 姓 名： 职 称： (工程设计 (工程技术研究 (软件开发 (应用研究 2014年05月20日 摘 要 本次毕业设计是关于的设计。首先对装料机作了简单的概述；接着分析了装料机的选型原则及计算方法；然后根据这些设计准则与计算选型方法按照给定参数要求进行选型设计；接着对所选择的装料机各主要零部件进行了校核。在的设计、制造以及应用方面,目前我国与国外先进水平相比仍有较大差距,国内在设计制造过程中存在着很多不足。 传动装置Abstract This graduation design is the design of a heating furnace charging machine. The loader is summarized; then analyzes the selection principle and the calculation method of the filling machine; then calculated based on these design criteria and selection method in accordance with the requirements of the given parameters selection and design; then check on the major components of loader selected. In the design, heating furnace charging machine manufacturing and application, at present our country compared with foreign advanced level there are still large gaps, China in the design and manufacture of heating furnace charging machine process there are many shortcomings. The structure is mainly produced by the motor power will need to transfer the power to the gear, and then transferred to the gear through the gear, the gear and the transition to another set of gear, and then through the transition to the worm gear. Design of key parts and the scheme of charging machine were introduced in detail, the main contents include system overall plan design, the choice of motor, actuator design, transmission parts of the design, the flywheel design, shaft design and checking and bearing selection, etc.. This paper introduces the development situation of the filling machine, filling machine structure design principle, analysis of loader and determine the overall scheme, drawing, mechanical drawings charging machine structure design content contained in the calculation, the conclusion and suggestion of structure design. The research of this thesis: (1) the overall structure design of loading machine. (2) analysis of loader working perfo