液压支架的数字化样机设计与仿真.pdfVIP

第 38 卷 2010 年第 17 期 　 辑 编 目 栏 本 液压支架的数字化样机设计与仿真 杨 闫向彤 健 西安科技大学机械工程学院 陕西西安 710054 华 小 翟 摘要：液压支架是综采工作面核心设备，采用 Pro/ E 软件实现液压支架零件的三维实体建模，通过虚 拟装配建立液压支架的数字化样机，利用 Pro/ E 的仿真功能对支架的伸柱、降柱、推溜、移架的运动 过程进行了运动仿真，研究样机的运动学特性。液压支架数字化样机的建立可以缩短其设计周期并提 高设计质量，有助于液压支架的优化设计。 采 关键词：液压支架；Pro/ E；数字化样机；运动仿真 中图分类号：TD355；TD391.9 文献标识码：A 论文编号：1001-3954(2010)17-0010-03 掘 Design and simulation of digitized prototype for hydraulic support YAN Xiangtong School of Mechanical Engineering, Xi’an University of Science Technology, Xi’an 710054, Shaanxi, China Abstract ：The hydraulic support is the core equipment on the fully-mechanized working face. 3D modeling of hydraulic support was realized with Pro/ E, and the digitized prototype for hydraulic support was established by virtual assembly. The movement simulation of support such as column lifting and falling, horizontal slide were conducted with Pro/E, and the kinematic characteristics of prototype studied also. The establishment of digitized prototype for hydraulic support may reduce the design cycle time as well as improve the design quality, which is helpful for the optimization design of hydraulic support. Keywords ：hydraulic support; Pro/ E; digitized prototype; movement simulation 液 压支架传统设计是一种基于经验、类比的设计 字化样机系统。 模式，这种建立在物理样机上的研发模式，成 本高，开发周期长。如果物理样机试验不够充分，产 1 液压支架的数字样机设计 品定型后会造成不可预知的结果，从而严重影响到液 在传统的工程设计中，设