函数信号发生器的设计【荐】.docVIP

摘 要 信号发生器是人们在科技生产中经常使用到的一种信号源，比如说，在日常教学学习中对电子电路的分析就能广泛地应用到信号发生器，信号发生器在工作生产的自动化控制系统中也是必不可少的。目前人们最常使用的信号发生器就是函数信号发生器，虽然价格昂贵，但是函数信号发生器能输出我们需要的特殊的波形。在本次课题设计中使用的是AT89C51单片机构成的发生器，通过单片机的控制，这个函数信号发生器能够产生三角波、方波、正弦波等多种特殊波形，并且在单片机上加一个外围器件--距阵式键盘，就能够使用键盘来选择波形频率的增加和减少，同时还进行了波形的选择，再用LCD来显示出来频率的大小。还要在单片机的输出端口接上DAC0832进行数模转换，后面再通过运算放大器对波形进行调整，最后输出波形接在示波器上显示，这种方法不仅准确而且容易操作。 关键词： 函数信号发生器 单片机 矩阵式键盘 DAC0832 LED Abstract Signal generator is a kind of signal source in people often used in the production of science and technology, for example ,widely used in electronic circuit analysis will be able to learn the daily teaching to signal generator, it is also necessary in the automation of production control system.The signa generator is currently the most commonly used people fuction signal generator, although the price is expensive, but it can output the special waveform that we need. In this paper, we use is composed of of single-chip AT89C51 generator based on MCU, this fuction signial generator can generate triangle wave, square wave, sine wave and other special waveform. And a peripheral device—matrix keyboard microcontroller in SISU, can increase and decrease the use of the keybobard to select the waveform frequency, also the waveform selection, then use LCD to display the size of the frequency. But the digital analog conversion at the output port of the microcontroller is connected to DAC0832, followed by operation amplifier to adjust the waveform, then finally output waveform displayed on the oscilloscope, this method is not only accurate and easy to operate. Keywords： fuction signal generator MCU Matrix keyboard DAC0832 LED 目录 摘要（中文）.....................................................1 摘要（英文）.....................................................1 第一章 绪论......................................................4 1.1 信号发生器的综述.............................................4 1.1.1 信号发生器的简单介绍.......................................4 1.1.2 信号发生器的分类...................................