透明防火墙.docVIP

透明防火墙 实验拓朴 实验目的 跨过防火墙来建立OSPF邻居 可以互相访问 实验配置 RT2(config)#interface e0/0 RT2(config-if)#ip address 192.168.1.2 255.255.255.0 RT2(config-if)#no shutdown RT2(config-if)#exit RT2(config)#interface loopback 0 RT2(config-if)#ip address 2.2.2.2 255.255.255.255 RT2(config-if)#ip ospf network point-to-point RT2(config-if)#exit RT2(config)#router ospf 1 /配置OPSF RT2(config-router)#router-id 2.2.2.2 RT2(config-router)#network 2.2.2.2 0.0.0.0 area 0 RT2(config-router)#network 192.168.1.0 0.0.0.255 area 0 RT2(config-router)#exit RT2#show ip interface brief /可以看到配置的接口IP信息 Interface IP-Address OK? Method Status Protocol Ethernet0/0 192.168.1.2 YES manual up up Ethernet0/1 unassigned YES unset administratively down down Ethernet0/2 unassigned YES unset administratively down down Ethernet0/3 unassigned YES unset administratively down down Ethernet1/0 unassigned YES unset administratively down down Ethernet1/1 unassigned YES unset administratively down down Ethernet1/2 unassigned YES unset administratively down down Ethernet1/3 unassigned YES unset administratively down down Loopback0 2.2.2.2 YES manual up up RT2#show ip route /查看路由可以看到学到的这条4.4.4.4的OSPF路由 Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 2.0.0.0/32 is sub