铝合金熔化极氩弧焊陶瓷衬垫单面焊双面成型焊接工艺研究_王小平.pdfVIP

网络出版时间：2014-04-14 14:31 网络出版地址：/kcms/detail/61.1133.TG1431.059.html 加工工艺曳 2014 年4 月第43 卷第7 期 铝合金熔化极氩弧焊陶瓷衬垫 面焊双面成型 焊接工艺研究 王小 胥 锴 (安徽机电职业技术学院机械系袁安徽芜湖24 1000) 摘 要院针对铝合金紫铜衬垫单面焊双面成型焊接工艺的缺点 提出采用柔性粘贴式陶瓷衬垫代替紫铜衬垫遥以铝 合金5083 例 验证铝合金熔化极氩弧焊陶瓷衬垫单面焊双面成型焊接工艺的可行性 获得了铝合金熔化极氩弧焊陶 瓷衬垫单面焊双面成型焊接条件及工艺要点遥 关键词院铝合金曰单面焊曰陶瓷衬垫曰脉冲焊工艺 + 中图分类号院TG457.14曰TG444 .7 文献标识码院A 文章编号院1001-3814(2014)07-0195-02 Research on MIG Welding Ceramics Backing Single-side Welding Double-side Forming Welding Technology for Aluminum Alloy WANG Xiaoping, XU Kai (Department of Mechanical Engineering, Anhui Technical college of Mechanical and Electrical Engineering, Wuhu 241000, China) Abstract 院In view of the disadvantages of copper backing single-side welding double-side forming welding technology for aluminum alloy, the flexible stick-on ceramics backing was proposed to replace the copper backing. Taking aluminum alloy 5803 as an example. MIG welding ceramics backing single-side welding double-side forming welding technology for aluminum alloy was carried out to verify the ceramics backing feasibility, and then the welding conditions and process parameters were obtained. Key words 院aluminum alloy; single-side welding; ceramics backing; pulse welding 目前 国内在工程实践中应用的铝合金熔化极 氩弧焊(MIG 焊)单面焊双面成型工艺采用的是紫铜 衬垫 此工艺需要压力架等复杂工艺装备 且仅适用 水平位置的直焊缝[1]遥 铝合金柔性粘贴式陶瓷衬垫[2] 是一种新型衬垫 该衬垫使用快捷方便 对铝合金结 构形状及位置适应性强 能实现铝合金的单面焊接