德尔福-选择性电镀设备的简单介绍.doc

德尔福-选择性电镀设备的简单介绍 小轮喷镀 小轮镀由喷镀柜，轮托，铂金钛金极喷嘴，模具，屏蔽带 等组成，对于带料或带料零件单面电镀，单条线镀，多条线镀 十分适合，多用于选择性镀金，镀银。 Small wheel plating consists Small wheel plating consists of cabinet, wheel tray, platinum tita-nium anode nozzle, mould, mask belt etc, which is very suitable to belt material or single-side contactor plating on belt material, single or multiple thread plating, very common used for selective gold or silver plating. 双面同步轮电镀 带料垂直通过，从表面粘有良好弹性及耐腐蚀性的硅胶 面的两条同步带中间穿过，将带料双面不需要电镀的部位 屏蔽起来，然后对露出的需要的部位进行喷镀。这种选择性 电镀主要适合双面单条状或多条状选择性电镀。 Two-sided synchronized turn of galvanization Belt material passes vertically between two synchronized belts, whose surface is covered by elastic and abrasion-resistant silicon, blocking certain part on the both sides and plating the exposed part. This kind of selective plating is suitable for dual-side single-strip or multiple-strips plating. 刷镀 也叫擦镀，电镀药水通过钛刷镀头带电溢出，通过刷镀布 的遮蔽，将带料与刷镀头接触的部位镀上需要的镀层。 Brush Plating Also named brush plating. Electroplating liquid flows from titanium brush with electricity, forming a plated layer on the contacted area with a mask in-between. 大轮喷电镀 其原理与小轮喷镀相似，主要用于选择镀带料较厚的产 品，可以防止带料变形。 Big wheel plating consists Its theory is similar to small wheel plating and it is more used for thick belt material in order to prevent belt di-stortion . 声明：本文中所有文字、数据、图片均只适用于参考，ISG系列性能参数表性能参数、ISG系列性能参数表结构尺寸参数等详情，请联系我们的在线客服或技术工程师 QQ411071791 请记住我们,深圳德尔福精密机械设备有限公司:/