Python Scripting in ABAQUS .doc

Python Scripting in ABAQUS Kevin Maxwell Texas AM University October 31, 2006 Introduction ABAQUS CAE provides a graphical user interface that allows the user to create finite element models that can then be analyzed in ABAQUS Standard. For every feature in CAE, there is a corresponding Python script command that the program uses when creating the model. If the language is understood well enough, an entire model can be created simply by running a script file. While one could write an entire script from scratch, ABAQUS provides several easier methods that autogenerate Python commands. When a model is created in CAE, two files are automatically created in the work directory. The replay file records every action that is performed in CAE including camera zoom/panning commands and also any mistakes that were made and then corrected. This file can be run to “replay” all the work that has been done on the model. The recover file records only the minimum necessary commands to recreate the model. If an error occurs and CAE closes without saving, the recover file can be run to recreate the model. When a model is saved, CAE uses the recover file to write a journal file. The journal file is a comprehensive script that shows all work saved on the model. Note that the recover file is deleted whenever the model is saved and all of its commands are transferred to the journal file. The recover and journal files provide an easy alternative to writing Python scripts from scratch. One can simply define a model in CAE and then save the Python commands from the recover or journal files as a separate script file. There are several valuable sources of information pertaining to scripting in ABAQUS. The ABAQUS Scripting User’s Manual and ABAQUS Scripting Reference Manual are invaluable resources that are included in the ABAQUS documentation. The user’s manual gives an overview to scripting while the reference manual provides in-depth coverage of every scripting command used in