双辉等离子表面冶金Ti-Cu阻燃合金制备工艺.pdfVIP

15 1 2005 1 Vol. 15 No. 1 The Chinese Journal of Nonferrous Metals Jan. 2005 : 1004 0609(2005) 01 0110 06 T-i Cu 张平则, 徐 重, 张高会, 贺志勇 ( , 030024) : , , T-i 6A-l 4V Cu , T-i Cu , 870 e 3. 5 h, 200Lm , T i Cu 2 , Cu : ; ; ; + : T 146.2 . 3 : A Preparation of double glow plasma surface metallurgy treated T-i Cu burn-resistant alloy ZHAN Ping-ze, XU Zhong, ZHAN ao-hui, HE Zh-i yong ( Research Institute of Surface Engineering, T aiyuan University of T echnology, T aiyuan 030024, China) Abstract: T o avoid the shortages of body burn-resistant titanium alloy like lower ratio strength, poor work process property and expensive cost, Cu element was introduced into the T-i 6A-l 4V substrate by using double glow plasma surface alloying technology and the burn- resistant alloyed layer was formed on the surface. The effects of source e- lectrode voltage, cathode voltage, temperature, gas pressure, distance between two cathodes, duration on composi- tion and case depth were studied. The best technological parameters were got . After 3. 5 h alloying at 870 e , the thickness of the alloyed layer reaches to 200Lm. T he composition in the alloyed surface layer gradually changes in the depth direction of the substrate and the microstructure is substrate microstructure plus diffused Ti Cu interme- 2 tallic. Preliminary tests reveal that the coppe