外文翻译--PLC控制器在风电机组中的应用.doc

PLC Controller of Wind Turbine 1 Introduction Wind energy as an inexhaustible, clean and pollution-free renewable energy, its exploitation has been widespread attention around the world, as one of the wind resource-rich countries, the level of Chinas wind power has made the rapid development . From the 20th century 70s, and network-based wind power has been gradually began to commercialize technologies become more sophisticated, increasing unit capacity, while the stall induction wind turbine wind farm has become the main model. As the main form of collecting wind energy, wind turbine control problem of growing importance. At present, run on wind turbine control, PLC control has been widely used at home and abroad. In recent years, PLC with its many features widely used in advanced industrial countries have become the standard industrial control equipment. It is designed specifically for industrial control, set electrical, instrumentation, control three-in one is to achieve an ideal control of mechatronics equipment. PLC can be programmed using the memory, in addition to the implementation of logical operations, order of operations, timing, counting and arithmetic operations such as instruction, but also to complete the order or timing of various closed-loop control functions. Through various communication interfaces and module processing, to digital or analog input and output for easy connection at all levels, small, anti-interference ability, high reliability, good stability in long hours under harsh environment, not intermittent operation, and programming is simple, easy to maintain. In this paper, S7 - 300 PLC system and network-based asynchronous stall wind turbine application are described. 2 A fan control device Fan Control is the safe and reliable operation of wind turbines a key technology, control devices and the wind turbine is closely related to the remaining parts, a wind turbine to run the brain, normal and reliable operation of the entire unit, and a