外文翻译--在水中利用高密度飞秒激光对玻璃表面进行加工英文版.pdf

Appl. Phys. A 87, 691–695 (2007) Applied Physics A DOI: 10.1007/s00339-007-3930-z Materials Science Processing y. hayasaki High-density bump formation on a glass surface d. kawamura using femtosecond laser processing in water Department of Optical Science and Technology, Faculty of Engineering, The University of Tokushima, 2-1 Minamijosanjima-cho, Tokushima 770-8506, Japan Received: 13 November 2006/Accepted: 29 January 2007 The typical surface morphology of glass processed by Published online: 29 March 2007 • © Springer-Verlag 2007 a tightly-focused femtosecond laser pulse, changes from a cavity to a bump when the focus position changes from the ABSTRACT Micrometer-sized bumps were formed on a glass outside to the inside of the glass. The cavity is surrounded surface using a focused femtosecond laser processing in water. by a ring-shaped protrusion and scattered debris. Their size, The bumps were formed over a wide ranges of pulse irradiation and the amount of debris strongly depends on the focus pos- parameters, including irradiation energy and focus position. The bumps exhibited a wide variety of morphologies and sizes de- ition also. A bump with a diameter from several hundred pending on the parameters. The use of a liquid, namely heavy nanometers to several micrometers is formed by melting the water,