鱼粉废水处理方案.docVIP

某鱼粉厂废水处理Project Profile 1. Background of project Effluent is actually quite rare: 99 - 98% sea water + organic pollutants from fish. 2. Design influent water quality Design water quantity：2500m3/day (10 hours per day) Influent oil levels: 0.4% SS: 1.0% 3. Wastewater treatment plant effluent indicator requirements Oil content ≤ 350 mg/l SS: 700 mg/l PH: 6.5－1. Building Water drainage design specifications GBJ15-882. Outdoor Water design specification3. Water standards Implementation Handbook4. Integrated Wastewater Discharge Standard GB8978-96. 5.Industrial Enterprises Lighting Design Standards (TJ73-79)6.industrial and civil General equipment electrical installation design specification (GBJ55-83) Chapter Ⅱ TREATMENT PROCESS OPTION 1. Selection Principle Process selection is the key to building sewage treatment plant, the treatment process selection is correct or not is in relation to the operation of the sewage station, infrastructure investment and operation costs. Therefore, the design of treatment processes must be based on the requirements of owners, combined with effluent water quality, water quantity, temperature, weather conditions, geographical location and economic strength and other factors, the appropriate choice of treatment process. The main principles of process selection are as follows: 1. Technology is advanced, the process is reasonable, application, and it has good impact resistance and maneuverability. 2. Treatment effect stability, hazardous material removal rate is high, the treated wastewater can meet the national effluent standard stability. 3. Easy to operate and manage, maintenance is easy. 4. Running costs (electricity, medicine) is low, reduce operating costs. 2. Process Selection At present , there are mainly two remove oil process, namely, Oil separator treatment process and the floatation treatment process, two processes have advantages and disadvantages, when in the choice ,we need based on the actual situation of the pr