A0全装配式预制溷凝土结构梁柱组合件抗震性能试验研究.pdf

25 1 Vol. 25, No. 1 2005 2 EARTHQUAKE ENG INEERING AND ENG INEER ING VIBRATION Feb. 2005 : 1000-1301(2005) 01-0081-07 赵 斌, 吕西林, 刘丽珍 ( , 200092) : : , , :; ; ; ; : P315. 97; TU37 : A Experim ental study on seism ic behavior of precast concrete beam-colum n subassemblage with fully assem bled joint Zhao Bin, LôX ilin, L iu L izhen ( State Key Laboratory for D isaster Reduction in ivilEngineering, TongjiU niversity, Shanghai 200092, hina) Abstract: By using the full-scalemodel comparable testmethod, the seism ic behaviors of cast-in-situ high strength concrete beam-column subassemblage, precast concrete beam-column subassemblagew ith cast-in-situ high strength concrete joint and precast concrete beam-column subassemblages w ith fully assembled joints, such as the failure pattern, hysteresis characteristic, skeleton curve, strength and stiffness deterioration, shear deform ation of the joint core zone, rotation of the beam end and column end, were studied in this paper. The results indicates that the pre- cast reinforced concrete beam-column subassemblagew ith cast-in-situ monolithic joint almost has the same seism ic capacity as the cast-in-situ reinforced concrete beam-column subassemblage, and the seism ic behaviors of the pre- cast concrete beam-column subassemblagesw ith fully assembled joints are quite different from the cast-in-situ high strength concrete beam-column subassemblage and the precast reinforced concrete beam-column w ith cast-in-situ monolithic join.t It is suggested that somemeasures should be taken to add the energy dissipation ability of the fu