具有初始弯曲和刚度不对称的转子碰磨现象分析.pdfVIP

36 6 上 海 交 通 大 学 学 报 Vol. 36 No. 6 2002 6 JOURNAL OF SHANGHAI JIAOT ONG UNIVERSIT Y Jun. 2002 : 1006-246 ( 2002) 06-0844-05 1, 2 1 张　韬 , 　孟　光 ( 1. , 200030; 2. , 510632) : 建立了考虑转子转速的新的碰磨力模型, 分析了具有 始弯曲和刚度不对称转子系统的 碰磨响应, 得到了系统参数对系统分叉和混沌响应的影响. 通过与刚度对称转子系统的碰磨现象进 行比较发现: 具有 弯和刚度不对称转子系统的碰磨响应有很多不同的运动特性, 这种不同来源于 转子两 个方向刚度的耦合作用, 刚度不对称越大, 系统越容易发生拟周期响应、越容易导致碰磨出 现; 不平衡参数越大, 系统响应的振幅越大、越容易发生碰磨和周期解分叉; 阻尼系数越小, 发生周 期解分叉的转速比越小. 系统响应随着转速比的变化引发了各种非线性现象. : 转子系统; 碰磨; 始弯曲; 刚度非对称 : O 322: A Rub-Impact Phenomenon of Rot or System w it h Init ial Bending and Asymmet ric St iff ness ZH AN G Tao1, 2 , MEN G Guang1 ( 1. . , , . , 200030, ; State Key Lab of Vibration Shock Noise Shanghai Jiaotong U niv Shanghai China 2. College of Science and Eng . , Jinan U niv. , Guangzhou 510632) : - - Abstract A new model of rub impact force considering varied rotating speed was derived and the rub im- pact response of a rotor system w ith initial bending and asymmetric stiffness was analyzed. T he influence of system parameters on the bifurcation and chaos response of the system w as calculated and investigated. M any different response characters betw een the rotor systems w ith and w ithout initial bending and asym- metrical stiffness are observed and the research indicates that the difference comes from the coupling of stiffness in tw o directions. T he larger the stiffness asymmetry is, the easier it is for quasi-periodic re- sponse to occur and the easier it is for rub-impact response