白车身焊装工艺三维表达方法及系统研究.pdfVIP

第6期 组合机床与 自动化加工技术 No.6 2015 年6 月 Modular Machine Tool Automatic Manufacturing Technique Jun. 2015 文章编号:1001-2265(2015)06-0130-04　 　 　 　 DOI:10.13462/ ki.mmtamt.2015.06.035 白车身焊装工艺三维表达方法及系统研究∗ 1 2 2 赵晓峰 ,屈亚宁 ,邱慧慧 (1. 山东大学高效洁净机械制造教育部重点实验室,济南　 250100;2. 山东山大华天软件有限公司, 济南　 250101) 摘要:白车身焊装二维工艺图复杂且看图困难,因此企业已经开始利用三维模型进行焊装工艺表达。 为解决各种焊装工艺图的三维表达问题,在分析焊装工艺三维表达的需求以及业务流程的基础上, 建立了基于MBD产品模型的工艺表达信息结构,设计了爆炸图、工位布置图、焊点分布图表达方案, 研发了焊缝、焊点、涂胶工艺的标注方法。 通过在某轿车焊装线进行验证,该方案及系统满足了白车 身焊装工艺的三维表达需求。 关键词:白车身;焊接工艺;工艺三维表达;焊点标注 中图分类号:TH165;TG506　 　 　 文献标识码:A Study on BIW Welding Process3D Expression Method and System ZHAO Xiao-feng ,QU Ya-ning ,QIU Hui-hui1 2 2 (1.Key Laboratory of High Efficiency and Clean Mechanical Manufacture,Ministry of Education,Shandong University,Jinan250100 ,China;2.Shandong Hoteam Technologies Co. ,Ltd. ,Jinan250101,China) Abstract:It is difficult to expressand read two-dimension welding process drawings of Body in White,so three-dimension modelshave being used in process drawings. In order to solve the three-dimensional weld- ing process expression issues,the demand and work flow are analyzed. A process information structure based on MBD models and an expression solution are put forward. This solution contains typical process view program,includes exploded view,workplace layout and welding point distribution. Three-dimensional mark methods of welding seams,welding spots,coating process and some basic notation are developed. This solution istested and verified at a car welding line,the results shows that this solution could meet the demand of three-dimension welding process. Key words:BIW (body in w