SiC颗粒表面处理对SiCCu复合材料性能的影响.pdfVIP

34 10 机 械 工 程 材 料 Vol. 34 No . 10 20 10 10 M aterials for M echanical En ineerin Oct. 2010 SiCSiC/ Cu 1 1 2 2 , , , ( 1. 河南工业大学材料科学与工程学院, 郑州450007; 2. 郑州大学材料科学与工程学院, 郑州450001) : 将SiC 颗粒在 1 100 e 和空气气氛下锻烧6 h 得到氧化态的SiC 颗粒, 在5% HF 中 浸泡24 h 得到 洗过的SiC 颗粒; 然后采用非均相沉淀包裹法制得铜包裹不同状态SiC 复合粉 体, 采用热压烧结工艺制备了含有35%SiC( 体积分数) 的SiC/ Cu 复合材料; 对复合材料的微观结 构和性能进行了研究和分析结果表明: 与原始态SiC 颗粒的复合材料相比, 对SiC 颗粒进行高温 氧化和 洗后使得SiC/ Cu 复合材料具有不同的界面结合状态, 均能提高复合材料的强度和硬度, 洗态SiC 颗粒制备的复合材料强度和硬度均最高 : 表面处理; SiC/ Cu 复合材料; 热压烧结 : T B333 : A : 1000-3738( 2010) 10-0036-04 Effect of Surface Treatment of SiC Particles on Properties of SiC / Cu Composites 1 1 2 2 WANG Chun-hua , FAN Xue- in , GUAN Shao-kang , ZHANG Rui ( 1. Colle e of Materials Science and En ineerin , H enan University of T echnolo y, Zhen zhou 450007, China; 2. School of Materials Science and En ineerin , Zhen zhou Universit y, Zhen zhou 450001, China) Abstract: SiC part icles w ere calcined at 1 100 e in air at mosphere for 6 h to obtain ox idized SiC particles and then immersed in aqueous solution of 5% hydrofluoric acid for 24 h to attain acid-etched SiC particles. Cu coated SiC composite pow ders w ere prepared by hetero eneous precipitation coated method and hot pressin sinterin w as used to prepare SiC/ Cu composites w ith 35vol% SiC particles. The m icrostructure and properties of t he composites were analyzed. The results show that com pared w ith the composites prepared w ith ori inal SiC particles, the composites made by hi h- tem perat ure ox idations and acid-etched SiC particles exhibited different int erfacial bondin states with the increase of stren