小型作坊有网棉被自动揉磨机的设计.docVIP

梧 州 学 院 毕 业 论 文 论文题目 小型作坊有网棉被自动揉磨 机的设计 系 别 专 业 机械设计制造及其自动化 班 级 学 号 学生姓名 指导教师（签名） 完成时间 201 年 月 摘 要 传统揉磨机自动化程度低、劳动强度大、生产效率低。本次毕业设计是对棉被加工作坊原有揉磨机的改进设计，以提高棉被揉磨效率，降低劳动强度。 棉被揉磨的作用是将棉纱与棉胎纤维磨合粘牢、起球，增加棉胎强度，是棉被加工过程中一道重要工序。本设计参照现有揉磨机原理，将揉磨机分为三个基础部件，三个核心机构，三个基本工作动作。分别为：总机架、下揉板、上揉板，上揉板升降机构、上揉板离心转动机构、下揉板水平移动机构，上揉板离心转动、竖直升降，下揉板水平移动。设计时首先对揉磨机的三个基础部件进行合理的尺寸和结构设计，再根据揉磨机的基础部件和三个基本动作进行合理机构设计，查找并计算揉机所需的各个技术参数，将各个机构或部件所需要的关键零件进行合理设计，对重要的旋转主轴进行受力分析和设计校验。最后用Pro/e软件将所有部件建模组合装配，并进行仿真分析。 揉磨机的三个核心机构分别用到两台三相异步电动机和一台直线电机来驱动不同顺序的三个机构。 关键词：有网棉被； 揉磨机； 剪式机构； Pro/e仿真分析 Design On Small Workshop Has A Net Quilt Kneading Machine Abstract The traditional Kneading Machine with low degree of automation, high labor intensity, low production efficiency. This graduation design is the quilts processing workshop original Kneading Machine design improvement, in order to improve the quilt Kneading efficiency, reduce labor intensity. The quilt is the role of Kneading cotton yarn and cotton quilt fiber in cement, pilling, increase the intensity of cotton quilt, is an important process in the manufacturing process of the quilt. The design principle of the Kneading Machine, the Kneading Machine consists of three basic components, the three core agencies, three basic action. Are: general frame,the rubbing plate, the kneading board, rubbing plate lifting mechanism, rubbing plate centrifugal rotation mechanism, kneading board under the horizontal moving mechanism, rubbing plate centrifugal rotation, vertical lifting, kneading board under the horizontal movement. Firstly, on three basic components of rolling mill size and reasonable structure design, and reasonable mechanism design based on component kneading mill and three basic movements, searching and calculating various technical parameters required for kneading machine, will be the key component agencies or comp