PLC与触摸屏在磨刀机数控系统中的应用.pdfVIP

: 1001- 2265( 2010) 11- 0068- 03 PLC与触摸屏在磨刀机数控系统中的应用 张航 (茂名学院机电工程学院, 广东 茂名 525000) :指出以磨刀机的工作原理和控制工艺为研究对象, 采用以三菱可编程控制器为核 , M 500系 列触摸屏为人机界面, 通过连接定位模块和通信模板组成控制系统的设计方法, 文中给出了详细的 硬件和软件实现过程, 设计出精美的多窗口操作界面, 目前阶段得出的结果表明:控制系统功能完 善, 能实现精确定位和调速, 简化了系统的电气线路, 实现复杂的控制, 设备运行稳定可靠, 界面易于 理解与操作, 有良好的应用效果 : 磨刀机; 触摸屏; 可编程控制器; 人机界面; 硬件; 软件 : P273 : A The Application of PLC and Touching Screen in the Counting Controling System of theWhetting KnifeM achine ZHANG Hang ( College ofM achinery and Electronic Engineering, Maom ing University, Maom ing 525000, China) Abstract: his text points out to takework principle and control craft ofwhetting the knifemachine as a re search object, adoption w ith M itsubishi programm able controller for core, theM 500 series touch holds for them anm achine interface to constitute the designm ethod of controling the system through the conjunction fixed positionmold piece and correspondence template, gives in the text detailed hardware and software car ry and designs an ofmany elegantw indow way operation interface. Currently stage get of result enunciation: Controling system function is perfec,t can carry out an accurate fixed position and adjust soon, smi plified the electricity circuit of system, carries out a complicated control. he equipmentmoves stabilized credibil ity, the interface is easy to comprehension and operation and has good of applied effec.t K ey words: whetting knife machine; touch screen; PLC; manmachine contact surface; hardware; software 0 , , , , , , , , ,