新型平行分度凸轮机构的综合与仿真_张玉华.pdfVIP

23 8 Vol. 23 No. 8 2004 8 MECHANICAL SCIENCE AND TECHNOLOGY Au ust 2004 : 1003- 8728( 2004) 08-0919-03 张玉华 ( , 243002) : 提出了一种新的平行分度凸轮机构, 它的特点是其分度凸轮具有自共轭的凸轮齿, 使分度期凸轮具有 续 的工作表面, 从而能够提高机构的动态性能介绍了该机构的模型和工作原理; 通过分析和综合, 给出了该机构存 在的一组参数应用相对运动法导出了自共轭凸轮齿的齿廓方程基于对该机构的综合结果, 开发了平行分度凸 轮轮廓自动设计和机构运动仿真的CAD 程序设计示例表明: 新机构的运动原理是可行的 : 平行分度凸轮; 分度凸轮机构; 综合与仿真 :TH 132. 47 : A Synthesis and Simulation of Indexing Mechanisms with New Plate Conjugate Cams ZHANG Yu-hua ( Colle e of Mechanical En ineerin , Anhui University of Technolo y, Maanshan 243002) Abstract: An indexin mechanism with new plate conju ate cams is proposed in this paper. The conju ate cam is characterized by a self-conju ate cam tooth which makes the cam mesh with a follower roller without alterna- tion durin an indexin rotation of the follower so as to improve the dynamic performance of the cam mecha- nisms. The model and workin principle of the cam mechanism are described, and its reasonable confi uration is found based on the synthesis and analysis of its parameters. The equations of profile for the self-conju ate cam tooth are derived by applyin the relative motion method. A CAD pro ram is developed for the desi n au- tomation of the profile of the new plate cam and the kinematic simulation of this kind of mechanisms based on its synthesis results. An example demonstrates that the new indexin mechanism is feasible. Key words: Plate conju ate cam; Cam mechanism; Indexin mechanism; Synthesis and simulation , , , , , , ,