《Microstructures mechanical properties and compressive creep behaviors of ascast Mg5Sn010Pb alloys》.pdfVIP

J. Cent. South Univ. Technol. (2011) 18: 290−295 DOI: 10.1007/s11771−011−0693−7 Microstructures, mechanical properties and compressive creep behaviors of as-cast Mg-5%Sn-(0−1.0)%Pb alloys 1 1 1 WANG Qing(王卿) , CHEN Yun-gui(陈云贵) , XIAO Su-fen( 肖素芬) , 2 1 1 LIU Hong-mei(刘红梅) , TANG Yong-bai(唐永柏) , ZHAO Yuan-hua(赵源华) 1. School of Materials Science and Engineering, Sichuan University, Chengdu 610065, China; 2. Department of Chemical and Materials Engineering, The University of Auckland, Private Bag 92019, Auckland, New Zealand © Central South University Press and Springer-Verlag Berlin Heidelberg 2011 Abstract: The microstructures, tensile properties and compressive creep behaviors of Mg-5%Sn-(0−1.0)%Pb (mass fraction) alloys were studied. The microstructures of the Mg-Sn-Pb alloys consist of dendritic α-Mg and Mg2Sn phase. The addition of Pb can refine the size of Mg Sn phase and grain size, reduce the amount of Mg Sn phase at grain or inter-dendrite boundaries and change the 2 2 distribution of Mg Sn phase. Pb exists in the Mg Sn phase or dissolves in α-Mg matrix. The mechanical properties of the tested 2 2 alloys at room temperature are improved with the addition of Pb. When the Pb content is over 0.5%, the mechanical properties are decreased gradually. The Mg-5%Sn-0.5%Pb shows the