An Application of Digital Signal Processor in Brain-computer Interface Based on.pdfVIP

An Application of Digital Signal Processor in Brain-computer Interface Based on Steady-State Visual Evoked Potential 1 1 1 1 1 Li Zhao , Daofu Hu , Longteng Xiao , Hui Shen , Qingguo Meng 1The School of Automation and Electrical Engineering Tianjin University of Technology and Education Tianjin,China E-mail: hutaofu0701@126.com Abstract—This paper proposes the disign method of a Brain- Computer Interface BCI system based on SSVEP.Achieved an II. SYSTEM STRUCTURE effective collection and processing of SSVEP information The systems hardware structure is shown in Figure through the combination of analog filtering and digital 1,the signal acquisition and processing system is consists of processing;Changed the features which were extracted from electrodes, EEG amplifier and TMS320F2812 development the processed signals into control commands to control the board , the results of acquisition and processing can output to peripherals. In this paper, digital signal processor DSP is the external mechanical and electrical equipment as a control used in BCI, with its superior processing power and rich command after feature extraction and classification;The peripheral resources, a real-time processing and miniature software is composed of acquisition procedures and digital BCI system become a realization. signal processing algorithms. Keywords-Brain-Computer Interface;DSP;SSVEP Electrode I. INTRODUCTION EEG TMS320F2812 Peripheral BCI is a system which is the realization of human brain Amplifier Board with a computer or other eleccteonic devices based on Electrode EEG[1],it does not depend on the brains normal output channel,is a new mode of communication and control.An Figure 1. System structure inportant application of BCI is to provide communication III. SSVEP INFORMATIO