Code_of_Practice_for_Surface_Preparation_and_Application_of_Organic_Coatings.pdfVIP

CODE OF PRACTICE FOR SURFACE PREPARATION AND APPLICATION OF ORGANIC COATINGS No. HDGASA 01-1990 Code of Practice for Surface Preparation and Application of Organic Coatings applied to New Unweathered Hot Dip Galvanized Steel (Sheet and Section) excluding In-line Coil Coating (Duplex Systems) This Code of Practice has been prepared for the use of manufacturers, contractors, engineers and others involved in the design or application of Duplex Systems. It has been compiled from work carried out by a co-ordinating committee drawn from industry. While recognising that each system must be designed and applied to meet particular circumstances, the committee assumes no responsibility or liability of any kind, in connection with this Code of Practice or its use by any person or organisation and makes no representation or warranties of any kind hereby. Hot Dip Galvanizers Association Southern Africa Quality House, Unit U4, St Christopher Rd, St Andrews, Bedfordview. P O Box 2212, Edenvale, 1610. Tel: (011)-456 7960 Fax: (011)-454 6304 HDGASA 01-1990 Code of Practice for Surface Preparation and Application of Organic Coatings Applied to New Unweathered Hot Dip Galvanized Steel (Sheet and Section) excluding In-line Coil Coating (Duplex Systems). CONTENTS Introduction 1. Scope 2. Glossary of Terms 3. Common Requirements 4. Surface