大型异步电动机定子振动与模态分析.pdfVIP

27 12 Vol.27 No.12 Apr. 2007 2007 4 Proceedings of the CSEE ©2007 Chin.Soc.for Elec.Eng. 0258-8013 (2007) 12-0041-05 TM306 A 470⋅40 ( 110023) Vibration and Modal Analysis of Stator of Large Induction Motors WANG Tian-yu, WANG Feng-xiang (School of Electrical Engineering, Shenyang University of Technology, Shenyang 110023, Liaoning Province, China) ABSTRACT: Accurate calculation of the stator natural frequencies and harmonic response of an electrical machine is essential to the prediction of acoustic noise and vibration. In 0 this paper, the 3D finite element analysis is used to study on the stator modal shapes and natural frequencies of large induction motor. The influence of laminated core and winding on the natural frequencies and modal shapes of the stator are investigated. Both finite element analysis and experimental measurement are used to determine the material properties of [1-2] anisotropy laminated stator core and windings. The study by comparing 3D finite element prediction with measurement [3-4][5] shows that the stator windings have a significant effect on the natural frequencies of large induction motor, and the Young’s [6-12] modulus of the winding is much lower than that of the solid [13-14](finite element methodFEM) copper. It is concluded that the active part and end part of the [15-17] stator winding cannot be tre