《《Finnish Swedish Ice Class Rules _20 December 2016》.pdfVIP

________________________________________________________________________________ GUIDELINES FOR THE APPLICATION OF THE FINNISH – SWEDISH ICE CLASS RULES Version 1 20 December 2005 Guidelines for the application of the Finnish – Swedish Ice Class Rules Version 1, 20 December 2005 ____________________________________________________________________________ Table of contents 1 Introduction 2 The status of the Guidelines 3 Implementation of the Finnish – Swedish Ice Class Rules in Finland and in Sweden 3.1 Implementation of the Finnish – Swedish Ice Class Rules in Finland 3.1.1 Ice class certificate of the FMA 3.2 Implementation of the Finnish – Swedish Ice Class Rules in Sweden 4 The purpose and the scope of the rules 4.1 Design philosophy 4.1.1 The engine power regulations 4.1.2 Hull structural design 4.1.3 Propeller, shafts and gears 4.1.4 Application of the rules for the design of ships for other sea areas 4.2 Application of the old versions of the Finnish – Swedish Ice Class Rules 4.2.1 Ships built in accordance with the Board of Navigation Ice Class Rules, 1971 4.2.2 Ships built in accordance with the Board of Navigation Ice Class Rules, 1985 5 General (Chapter 1 of the rules) 5.1 Ice classes 6 Ice class draught (Chapter 2 of the rules) 7 Engine output (Chapter 3 of the rules) 7.1 Definitions (Paragraph 3.2.1 of the rules) 7.2 Existing ships of ice class IB or IC (section 3.2.3 of the rules) 7.3 On selection of the propulsion system 7.4 Other methods to determine Ke or RCH 7.4.1 Other methods to determine Ke 7.4.2 Other methods to determine RCH 8 Hull structural design (Chapter 4 of the rules) 8.1 Longitudinal frames 8.1.1 Frame spacing and installation of brackets 8.1.2 Vert