《《三菱IPM模块在PWM整流的应用》.pdf

High performance intelligent power module for PWM rectifier application Sun Jian, Mitsubishi Electric Electronics (Shanghai) Co., Ltd. China Li wenqing, Dalian GONA technology engineering Co., Ltd. China Abstract: With the development of power electronics, there are more and more inductive load in power system and the pulse current result by inductive load will bring bad effect to the quality of the grid; On the other hand, when motor of load worked as a generator, the generated energy will be waste. Pulse width modulation(PWM) rectifier have a good performance in this circuit, which can make the input current work at sinusoidal state and improve the power factor; This paper showed the method how to design the PWM rectifier by using intelligent power module(IPM), which including topology selection, control method and power module selection, power losses calculation and prototype testing. At last, some pictures of testing waveform are given. 1. Functions of PWM rectifier 1.1. As a rectifier to transfer energy from AC to DC side and keep input current working at sinusoidal state (λ=1); 1.2. As a inverter to transfer energy from DC to AC side when motor of load worked as a generator and keep input current working at sinusoidal state (λ=-1). 2. Topology and control method selection 2.1. Topology We select 3-phase bridge topology for our design; This topology is very popular especially for large power rating equipment. Fig.1 shows this topology: Fig.1. 3-phase topology 2.2 Control method selection We adopted vector control method based on d-q axis, both out out voltage of PWM rectifier and current of input are monitored for system control, we can change power ratting and reference of current according the va