《sony_psp-2016_series_ta-085_1st_edition_level-3_sm》.pdf

PSP-2000 TA-085 SM-PSP-3083E-01 PSP-2000 series TA-085 BOARD SERVICE MANUAL 1st edition Level 3 CS Department Published in Japan©2007. 06 Reproduction Prohibited PSP-2000 TA-085 SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly LEAKAGE TEST CAUTION soldered connections. Check the entire board surface for The AC leakage from any exposed metal part to earth ground The use of optical instruments with this product will increase solder splashes and bridges. and from all exposed metal parts to any exposed metal part eye hazard. As the laser beam used in this UMD Drive is 2. Check the interboard wiring to ensure that no wires are having a return to chassis, must not exceed 0.5 mA (500 harmful to eyes, do not attempt disassemble the cabinet. “pinched” or contact high-wattage resistors. microampers.). Refer servicing to qualified personnel only. 3. Look for unauthorized replacement parts, particularly Leakage current can be measured by any one of three methods. tran