《HEIDENHAIN for BLUM_TOOL_TOUCH_PROBE》.pdf

1. 雷射設備安裝 2. 雷射電路安裝 (electrica linstallation) 3. 設定內容說明 (BULM_000.TAB) MOD → 807667 → PGM MGP → PLC:/BLUM → BLUM_000.TAB 0 Marker/Flag start address +1200 Marker start address M**** . 輸入 PLC_Marck 1 PLC-input signal Dynamic +32 Number PLC-input I*** . 動態 I 點(綠色) 2 PLC-input signal Laser ok +31 Number PLC-input I*** . 雷射待命 I 點(灰色) 3 PLC-input signal Static +30 Number PLC-input I*** . 靜態 I 點 4 Error number offset +530 Value=Line in Error.A +300 . 錯誤訊息位址+300 5 Axis number radius axis R +0 Axis X=0/ Y=1/ Z=2 . 半徑量測軸向(X=0) 6 Axis number laser axis S -1 Axis X=0/ Y=1/ Z=2/ locked=-1 . 雷射中心點軸向(Y=1) 7 Axis number length axis L +2 Axis X=0/ Y=1/ Z=2 . 長度量測軸向(Z=2) 8 Measuring pos. radius axis R +104.1 Laser beam middle in radius axis . X 軸量測座標 9 Measuring pos. laser axis S +0.0 Middle betw. transmitter and receiver . Y 軸量測座標 10 Measuring pos. length axis L -365.6 Laser beam middle in length axis . Z 軸量測座標 11 Overtravel in radius axis R +80.0 Distance beam to collision edge . X 軸量測半徑移動行程到障礙物距離 12 Overtravel in laser axis S +65.0 Distance focus to collision edge . Y 軸量測移動到雷射光中心行程到障礙物距離 13 Overtravel in length axis L +54.0 Distance Nano=20mm/Micro=54mm/Mini=XXmm. Z 軸量測刀長行程到障礙物距離 14 Coll.dist.on approach side axis R +0 from the side=15mm/ from above=20mm . 15 reserved +0 reserved . 16 reserved +0 reserved . 17 reserved +0 reserved . 18 Safety position above b